User guide

Policy Manager
Reference Guide 241
PPTP Logging dialog box
Enable Control Channel Protocol Logging (TCP 1732)
Check to enable control channel protocol logging.
Enable Data Channel Protocol Logging (IP 47)
Check to enable data channel protocol logging.
Enable Data Channel Packet Logging (IP 47)
Check to enable data channel packet logging.
Remote Gateway dialog box
Name
This name identifies a gateway within the administration and
monitoring tools but is not passed to other devices.
Key Negotiation Type
An IPSec tunnel can use either isakmp (dynamic) or manual key
negotiation type. Dynamic is the most frequently used type.
Remote ID Type
Enter the Remote ID type of the remote gateway.
Shared Key
Enable this checkbox and enter the shared key. The shared key
field is only available for isakmp-negotiated gateways. The
identical key must be entered on the IPSec-compliant device at the
other end of the gateway.
Firebox Certificate
Enable this checkbox to use a Firebox certificate.
More
Click to show and set the Phase 1 settings. Phase 1 refers to the
initial phase of the IKE negotiation. It involves authentication,
session negotiation, and key exchange.
Local ID Type
In the drop list, specify IP Address, Domain Name, or User Name.
To determine local ID type, in Policy Manager, select Setup =>
Name.
Authentication
In the drop list, specify the type of authentication: SHA1 or MD5.