User guide

CHAPTER 12: Field Definitions
224 WatchGuard Firebox System 6.0
IPSec Configuration dialog box
IPSec Routing Policies
A list of current IPSec virtual private networking routing policies.
The list displays:
Local Address - The IP address of the local Firebox
Remote Address - The IP address of the remote IPSec-compliant
device
Disposition - Security disposition of the policy
Tunnel - Identifying name of the tunnel used by the policy
Destination Port - (optional) The port to which the Firebox sends
communications for the policy
Protocol - (optional) The protocol used by the policy
Source Port - (optional) The port from which the Firebox receives
all communication for the policy
DVCP - Identify if use DVCP
Move Up
The Firebox handles policies in the order listed top to bottom in
the IPSec Routing Policies list. Initially, the policies are listed in
the order created. Use the Move Up and Move Down buttons to
reorder the policies from the most specific to the least specific to
ensure that sensitive connections are routed along the higher
security tunnels.
Move Down
The Firebox handles policies in the order listed top to bottom in
the IPSec Routing Policies list. Initially, the policies are listed in
the order created. Use the Move Up and Move Down buttons to
reorder the policies from the most specific to the least specific to
ensure that sensitive connections are routed along the higher
security tunnels.
Add
Click this button to open the Add Routing Policy dialog box and
add a new IPSec routing policy.