User guide

CHAPTER 12: Field Definitions
210 WatchGuard Firebox System 6.0
Firebox Name dialog box
Name
Enter a unique Firebox name. This name is used to identify the
Firebox in monitoring, reporting, logging, and status tools.
OK
Closes this dialog box and saves any changes.
FTP Proxy dialog box
Make incoming FTP connection read only
Enable this checkbox to make the FTP service read only for
incoming FTP requests.
Make outgoing FTP connections read only
Enable this checkbox to prevent internal personnel from
transfering files to an FTP.
Deny incoming SITE command
Enable this checkbox to prevent users from using the SITE
command, which would (if not denied) allow them to execute
arbitrary programs on the FTP server. This is set to Deny by
default since allowing its use can be very dangerous.
Force FTP session timeout
Enable this checkbox to disconnect FTP sessions after a designated
time for idle or hung connections.
Idle timeout
Enter or select the duration in seconds that an idle or hung FTP
connection remains before terminated by the firewall.
Arrows
Use the arrows to select your preferred value.
Log incoming accounting/auditing information
Enable this checkbox to record the number of bytes transferred
per incoming FTP session. You can then retrieve this "byte count"
information by running Historical Reports and specifying the
statistical parameters you want.