User guide

Policy Manager
Reference Guide 201
DVCP Client Setup dialog box
Enable this Firebox as a DVCP Client
The Firebox can be treated as a client in an Enhanced DVCP
network even if the Management Station and Firebox itself are not
upgraded with Enhanced DVCP (VPN Manager 2.0 or later).
Enable this checkbox to enable this Firebox to be a DVCP client
and then add the servers to which it can be connected.
Firebox Name
Enter the Firebox name as it should appear in all monitoring and
configuration tools. Use this name to identify the Firebox among
other DVCP devices.
Enable debug log messages for the DVCP Client
Enable this checkbox to enable detailed log messages from the
Firebox client to facilitate with troubleshooting and debugging the
IPSec tunnel between the Firebox and the DVCP server.
Debugging options can considerably increase the number of log
messages and are recommended only during troubleshooting.
DVCP Servers
A list of DVCP servers configured on your network. Any Firebox
can act as a DVCP server.
Add
Click to open the DVCP Server Properties dialog box and add a
new DVCP server.
Edit
Select a server from the list and click to edit the server properties.
The DVCP Server Propeties dialog box opens.
Remove
Click to remove the selected server from the list above.
OK
Closes this dialog box and saves any changes.