User guide

Configuration and Management Basics
52 Firebox X Edge e-Series
4. To set the system time automatically, select the Use NTP to periodically automatically set system
time option. To set the time manually, select the Set date and time manually option. If you set the
system time manually, skip to step 6.
5. If you set the system time automatically, the Firebox X Edge gets the current time from the selected
server in the NTP Servers list. If that server is not available, the Edge uses the next server.
o To add a time server, type the server name in the Add New Server field and click Add.
o To remove a time server, select the server from the NTP Servers list and click Remove.
o Click a server to select it as the default time server.
To save your changes, skip to step 8.
6. If you set the system time manually, you must set both the date and time.
o Select the month from the first drop-down list.
o Select the year from the second drop-down list.
o Click the button with the number that is today’s date.
7. To the right of the date, set the time.
o Type the hours in the first field.
o Type the minutes in the second field.
o Type the seconds in the third field.
o Select AM or PM from the drop-down list.
8. Click Submit.