User guide

User Guide 45
Configuration and Management Basics
8. In the Management Server Address text box, type the IP address of the Management Server if it has
a public IP address. If the Management Server has a private IP address, type the public IP address of the
Firebox that protects the Management Server.
The Firebox that protects the Management Server automatically monitors all ports used by the
Management Server and will forward any connection on these ports to the configured Management
Server. No special configuration is required for this to occur.
9. Type the Client Name used to identify your Firebox X Edge in the management server configuration.
10. Type the Shared Key.The shared key is used to encrypt the connection between the Management
Server and the Firebox X Edge. This shared key must be the same on the Edge and the
Management Server.
11. Click Submit.
Use these steps to update the Edge from the Management Server.
1. Open WatchGuard System Manager and connect to your Management Server.
2. Click the Device Management tab.
3. Right-click the Firebox X Edge you want to restore, and select Update Device.
4. Select the Download Trusted and Optional Network Policies, Reset Server Configuration, and
Expire Lease check boxes.
5. Click OK. The Firebox X Edge restarts and can now connect to the Management Server.
Related questions
What is included in the Edge backup configuration file?
When you back up an Edge configuration file, it includes all Edge policies and settings, user
passphrases, and manual VPN configuration information. It does not include any license information,
GAV signatures, or configuration information related to WatchGuard System Manager access or
managed VPN tunnels.
Can I use the procedure in this document to create a backup configuration file for my Firebox X Edge (non-e-
Series) or SOHO6?
Yes. The same restrictions apply.