User guide

User Guide 35
Configuration Pages Overview
UDP is a stateless protocol. For UDP, the connection shows as:
o REPLIED - there have been packets sent in both directions
o UNREPLIED - packets have been sent in only one direction
Other protocols are shown as "n/a".
Expires in (secs)
Number of seconds before the connection times out unless traffic is sent on the connection to restart
the timer.
Components list
This status page shows the software that is installed on the Edge. Each attribute is shown separately:
 Name
 Version
 Build number
 Build time
 Remove link - The Remove column does not usually show any components. Any components shown
on this list are those supplied by an Edge technical support representative given to you for
troubleshooting.
DHCP leases
This status page shows the DCHP server and the leases used by the Edge, including DHCP reservations.
Status
If it appears to the DHCP server that the Edge is using the address, the status is Active. If it appears to
the DHCP server that the Edge is not using the address, the status is Abandoned.
IF
Edge interface that the client is connected to.
IP
IP address for the lease.
Times
S = time that the client requested the lease (start time).
E = time that the lease expires (end time).
MAC
MAC address associated with the lease.
Hostname
If a host name is available, it is shown here.