User guide

User Guide 287
About Mobile VPN with SSL
Enable the Edge to use Mobile VPN with SSL
1. To connect to the System Status page, type https:// in the browser address bar, and the IP address
of the Firebox X Edge trusted interface.
The default URL is https://192.168.111.1
2. From the navigation bar, select VPN > Mobile VPN with SSL.
The SSL VPN page appears.
3. To enable Mobile VPN with SSL, select the Enable Mobile VPN with SSL check box.
4. Configure the settings on the General and Advanced tabs. Each setting is described below.
SSL VPN General Tab
Gateway
The Gateway is the public IP address that Mobile VPN clients connect to. You must type an IP address
assigned to the external interface of your Edge. If you have configured more than one IP address for
your external interface, or you have configured WAN failover with the WAN2 port on your Edge, add
this IP address in the Secondary text box. The Edge tries to connect to the secondary IP address if it
cannot connect to the primary IP address.
If you use the dynDNS service because your Firebox has a dynamic IP address, you can type the
domain name instead of an IP address in these fields.
Routes
Select Force all traffic through the tunnel if you want all client traffic to be routed through the
Mobile VPN tunnel. If this check box is clear, only traffic sent to the trusted or optional networks is
routed through the tunnel.