User guide

About Mobile VPN with IPSec
276 Firebox X Edge e-Series
3. From the left pane, select Link Firewall.
4. From the Stateful Inspection drop-down list, select when connected or always. If you select when
connected, the link firewall operates only when the VPN tunnel is active for this profile.
If you select always, the link firewall is always active, whether the VPN tunnel is active or not.
5. Click OK.
About the desktop firewall
When you enable a rule in your firewall configurations, you must specify what type of network the rule applies
to. In the Mobile VPN client, there are three different types of networks:
VPN networks
Networks defined for the client in the client profile they import.
Unknown networks
Any network not specified in the firewall.
Friendly networks
Any network specified in the firewall as a known network.
For information about how to enable the desktop firewall, see Enable the desktop firewall
.