User guide

Quarantine Server
226 Firebox X Edge e-Series
Configure the Quarantine Server
When you configure the Quarantine Server, you have these options:
 Set general server parameters
 Change the expiration and user domain settings
: When to delete or how long to keep messages, and
add and delete user domains. Only users in the domains that are in this list can have their messages
sent to the Quarantine Server.
 Change notification settings
: The message sent to users that tells them they have messages on the
Quarantine Server.
 Change logging settings
 Change Quarantine Server rules
: Add, change, or delete rules that determine messages to that the
Quarantine Server will automatically delete.
Set general server parameters
1. To open the Quarantine Server Configuration dialog box, right-click and select Configure.
2. Type the server management passphrase. This is the server management passphrase you created in
the second screen of the Quarantine Server Setup Wizard or when you configured your Management
Server.
The Quarantine Server Configuration dialog box appears.
3. To change the default maximum database size of 10000 MB, type a new value in the Maximum
database size field. The current database size and available space appear to the right of this field.
When the Quarantine Server runs out of drive space, it refuses to accept new messages and drops any
subsequent email messages it receives.
4. You can specify that you want to be warned when the database approaches its limit. Select the Send
a warning if the database reaches the warning threshold check box. Use the arrows to specify the
warning threshold, and type the email address of the person to receive the warning in the Send
warning message to field.
For example, if you select the check box, use the default warning threshold of 90%, and use the default
maximum database size of 10000 MB (10 GB), the Quarantine Server sends the warning message when
9000 MB have been used and only 1000 MB are available.
5. In the Outgoing email server field, type the address of the outgoing SMTP email server.
6. If your email server requires authentication, select the User login information for the E-mail server
check box and type the user name and password for the email server. If the user name and password
are not required for your SMTP server, keep the fields blank.