User guide

WebBlocker
202 Firebox X Edge e-Series
Configure global WebBlocker settings
The first WebBlocker page in the Firebox X Edge e-Series configuration pages is the WebBlocker Settings page.
Use this page to:
 Activate WebBlocker
 Set the full access password
 Set the inactivity timeout
 Set an action if the Edge cannot connect to the WebBlocker server
 Set an action if the WebBlocker license expires
To configure WebBlocker:
1. To connect to the System Status page, type
https:// in the browser address bar, and the IP address
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select WebBlocker > Settings.
The WebBlocker Settings page appears.
3. Select the Enable WebBlocker check box to activate WebBlocker for HTTP or HTTPS.
4. If you want to allow users to bypass WebBlocker if they know the full access password, select the
Enable WebBlocker override check box. Type a password in the Full Access Password field, and then
type the same password again in the Confirm Password field.
The full access password gives access to all web sites until the inactivity timeout is reached or until an
authenticated user logs out. This feature operates only with HTTP proxy policies.