User guide

Wireless Setup
106 Firebox X Edge e-Series
8. From the Authentication drop-down list, select the type of authentication to enable for wireless
connections to the optional interface. We recommend that you use WPA2 if the wireless devices in
your network can support WPA2.
9. From the Encryption drop-down list, select the type of encryption to use for the wireless connection
and add the keys or passwords required for the type of encryption you select. If you select an
encryption option with pre-shared keys, a random pre-shared key is generated for you. You can use
this key, or type your own.
10. Click Submit to save your configuration changes.
Enable a wireless guest network manually
1. To connect to the System Status page, type https:// in the browser address bar, and the IP address
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select Network > Wireless Guest.
You can also use the wireless guest network configuration wizard available on the Wizards page of
your Edge configuration menu.