User guide

Configuring Firewall Settings
66 WatchGuard Firebox X Edge
pare the value of access to each service against the security risk
caused by that service.
When configuring a service, you set the allowable traffic sources and
destinations, as well as determine the filter rules and policies for the
service.
Preconfigured (common) services
A number of pre-configured services are available. Follow these
steps to change the configuration of the incoming filters for com-
mon services:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox X
Edge.
The default IP address is: https://192.168.111.1.
2 From the navigation bar at left, select
Firewall => Incoming or Outgoing.
The Filter Traffic page appears.
3 Locate a pre-configured service, such as FTP, Web, or Telnet.
Then select either Allow, Deny, or No Rule from the drop-down
list. Continue for all the services you want to configure.
4 Click Submit.