User guide

Changing Your Network Settings
62 WatchGuard Firebox X Edge
is used. If the WAN1 port is not available, the Firebox connects
through the WAN2 port.
To configure the failover network:
1 Connect one end of a straight-through Ethernet cable to the
WAN2 port, and connect the other end to the source of the
secondary external network connection. This connection can be
a cable modem or a hub.
2 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox X
Edge.
The default IP address is: https://192.168.111.1
3 From the navigation bar at left, select
Network => WAN Failover.
The WAN Failover page appears.