User guide

Changing Your Network Settings
58 WatchGuard Firebox X Edge
2 From the navigation bar at left, select Network => Routes.
The Routes page appears.
3 Click Add.
The Add Route page appears.
4 From the Type drop-down list, select either Host or Network.
A host is a single computer. A network is a range of IP addresses on
which many computers can connect.
5 Type the IP address of the route’s destination and the IP address
for the route’s gateway in the applicable fields.
The gateway of the route is the local interface of the router.
6 Click Submit.
To remove a route, select the route and click Remove.