User guide

Configuring Static Routes
User Guide 57
N OTE N OTE
All changes to the Optional Network Configuration page require
that you click Submit and then reboot the Firebox before they
take effect. But you can make all the changes you want to make
and then reboot just once when you are done.
You can either enable or disable the DHCP server on the optional
network.
Requiring encrypted connections
You can require encrypted MUVPN connections on this interface if
you want to secure a wireless network. If you choose this option, all
traffic from wireless clients is encrypted. This reduces the possibility
of drive-by “snooping” into a wireless network connected to the
optional port.
Configuring Static Routes
To send specific traffic to different segments of the Firebox® X Edge
trusted network connected through a router or switch, configure
static routes.
Follow these instructions to configure static routes:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox X
Edge.
The default IP address is: https://192.168.111.1