User guide

Changing Your Network Settings
50 WatchGuard Firebox X Edge
To configure the Firebox as a DHCP server:
1 If you have not already done so, use your browser to open the
Firebox X Edge configuration pages. Select Network => Trusted.
The Trusted Network Configuration page appears.
2 Select the Enable DHCP Server on the Trusted Network
checkbox.
3 Type the first IP address and last IP address that is available for
the computers that connect to the trusted network in the
applicable fields.
The address range must be on the same network as the trusted IP
address. For example, if your trusted IP address is 192.168.200.1, the
range should be from 192.168.200.2 to 192.168.200.252.
4 Type the WINS Server address, DNS Server primary address, DNS
Server secondary address, and DNS Domain server suffix in the
applicable fields.
If no value is entered, the Firebox by default uses the address settings
provided to it from your service provider.
5 Click Submit.
6 Reboot the Firebox X Edge.