User guide

Configuring the External Network
User Guide 47
If your ISP uses PPPoE
If your ISP assigns IP addresses through PPPoE, your PPPoE login
name and password are required to configure the Firebox X Edge.
For more information in PPPoE, see “About PPPoE” on page 6.
To configure the Firebox for PPPoE:
1 Open your Web browser and click Stop.
Because the Internet connection is not configured, the browser cannot
load your home page from the Internet. The browser can open the
configuration pages in the Firebox.
2 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox X
Edge.
The default IP address is: https://192.168.111.1
3 From the navigation bar at left, select Network => External.
The External Network Configuration page opens.
4 From the Configuration Mode drop-down list, select PPPoE
Client.
5 Type the PPPoE login name supplied by your ISP.
6 If your ISP provides a domain name, type it in the Domain field.
Your ISP most likely provides your domain name as part of your login
name; for example, myname@mydomain. If your ISP tells you to use
username@domain as your login, type username in the Name field and
domain in the Domain field. The “at” sign (@) is dropped. If your ISP
provides only a username and password, then leave the Domain field
blank.