User guide

User Guide 43
CHAPTER 4 Changing Your
Network Settings
A primary task in setting up your WatchGuard® Firebox® X Edge is
configuring the network interfaces. At the least, you must configure
the external and trusted network interfaces to enable traffic to flow
through the Firebox from the Internet to the internal network. You can
also set up a third, optional interface, which connects to a second
secured network, typically any network of servers provided for public
access.
You can set up your network either with the Network Interface Wizard
or by manually using the Network page of the Firebox X Edge config-
uration pages.
Using the Network Interface Wizard
The easiest way to set up your Firebox® X Edge network is with using
the Network Interface Wizard.
1 From the navigation bar at left, select Wizards.
2 Next to Configure all Firebox X Edge network interfaces,
including WAN failover, click Go.
3 Work through the wizard, following the instructions on the
screens. Steps associated with optional functionality you decide
not to enable are automatically skipped by the wizard.