User guide

Rebooting the Firebox
User Guide 41
Using the Web browser
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox X
Edge.
The default IP address is: https://192.168.111.1
2 Click Reboot.
Disconnecting the power supply
Disconnect the Firebox power supply. After a minimum of 10 sec-
onds, connect the power supply.
Remote reboot
The remote Firebox X Edge must be configured to forward incoming
HTTP (Web) or FTP traffic to the Firebox’s trusted interface IP
address if you want to use the following method to reboot it. For
more information on how to configure the Firebox to receive incom-
ing traffic, see “Configuring Incoming and Outgoing Services” on
page 65. Also, see the following FAQ for more information on con-
figuring a Firebox X Edge to receive incoming traffic:
https://www.watchguard.com/support/tutorials/
stepsoho_remotemanage.asp
1 Type the external network IP address of the remote Firebox X
Edge in your browser window to connect to its System Status
page.
2 Click Reboot.