User guide

Factory Default Settings
User Guide 39
Factory Default Settings
The term factory default settings refers to how the Firebox® X Edge
is configured when you first receive it—before you have made any
changes of your own to the configuration. The default network and
configuration settings for the Firebox X Edge are as follows:
Trusted network
- The default IP address for the trusted network is 192.168.111.1.
The subnet mask for the trusted network is 255.255.255.0.
- The Firebox X Edge is configured to assign IP addresses for
computers on the trusted network through DHCP. You can also
statically address computers in the trusted network with IP
addresses in the 192.168.111.2–192.168.111.254 range.
External network
- The external network settings use DHCP.
Optional network
- The optional network is disabled.
Firewall settings
- All incoming services are blocked.
- An outgoing service allows all outbound traffic.
- All of the options on the Firewall Options page are disabled.
- The DMZ pass-through is disabled.
System Security
- The System Security is disabled. The system administrator name
and system administrator passphrase are not set. All computers
on the trusted network can access the configuration pages.
- Remote Management is disabled.
- VPN Manager Access is disabled.
- The remote logging is not configured.
WebBlocker
- The WebBlocker feature is disabled and the settings are not
configured.
Upgrade Options
- The upgrade options are disabled until you enter the license
keys into the configuration page.