User guide

Installing the Firebox® X Edge

24 WatchGuard Firebox X Edge

PPPoE Address Settings

For more information in PPPoE, see “About PPPoE” on page 6. To

configure the Firebox for PPPoE:

1 Open your Web browser and click Stop.

Because the Internet connection is not configured, the browser cannot

load your home page from the Internet. The browser can only open the

configuration pages stored on the Firebox.

2 Type the IP address of the trusted network in your browser

window to connect to the System Status page of the Firebox X

Edge.

The default IP address is: https://192.168.111.1

3 From the navigation bar at left, select Network => External.

The External Network Configuration page opens.

4 From the Configuration Mode drop-down list, select PPPoE

Client.

PPPoE Setting Value

Domain

Password