User guide

Installing the Firebox® X Edge
22 WatchGuard Firebox X Edge
2 In the Address bar, type the Firebox trusted interface IP address
which is https://192.168.111.1 for a new Firebox. Press the
Enter key.
Configuring the External Interface
Your Internet Service Provider (ISP) uses DHCP, PPPoE, or static IP
addressing to identify your computer on their network. After you
connect the Firebox, you must configure the external interface with
the information from your ISP.
Setting the Firebox to use DHCP
A new Firebox uses DHCP to get an IP address for the external inter-
face. If your ISP uses DHCP addressing to identify your computer on
their network, you do not need to make a configuration change
unless the ISP gives you a DHCP ID or name. If necessary, use this
procedure to set the DHCP ID or name:
1 Open your Web browser. Browse to the System Status page at
https://192.168.111.1.
Type the URL in the Address bar of your browser and press the [Enter]
key.