User guide

Connecting to the System Configuration Pages
User Guide 21
use DHCP. You must use an IP address on the same network as the
Firebox X Edge trusted interface.
1 Click Start => Control Panel.
The Control Panel window appears.
2 Double-click the Network Connections icon.
3 Double-click the Local Area Connection icon.
4 Double-click the Internet Protocol (TCP/IP) item.
The Internet Protocol (TCP/IP) Properties dialog box appears.
5 Select the Use the following IP address option.
6 In the IP address field, type an IP address on the same network
as the Firebox trusted interface. We recommend 192.168.111.2.
The default trusted interface network is 192.168.111.0/24. The last
number can be between 2 and 254.
7 In the Subnet Mask field, type 255.255.255.0.
8 In the Default Gateway field, type the IP address of the Firebox
trusted interface.
The default Firebox trusted interface address is 192.168.111.1.
9 Click OK to close the Internet Protocol (TCP/IP) Properties
dialog box.
10 Click OK to close the Local Area Network Connection
Properties dialog box. Close the Network Connections and
Control Panel windows.
Your computer is now connected to the Firebox X Edge.
Browsing to the System Status page
Use a Web browser to connect to the Firebox and change network
settings.
1 Open your Web browser.
If this is the first connection to the Firebox, the End User License
Agreements appears. You must accept the agreement and set your
administrator password to continue. See