User guide

Installing the Firebox® X Edge
14 WatchGuard Firebox X Edge
network address translation (NAT). You must get a public IP
address and disable NAT on your intranet router for full
functionality. Get instructions from your ISP.
Your TCP/IP Properties Table
To find your TCP/IP properties, follow the instructions for your com-
puter operating system.
Microsoft Windows 2000 and Windows XP
1 Click Start => Programs => Accessories => Command Prompt.
2 At the MS-DOS prompt, type ipconfig /all and then press
the Enter key.
3 Record the values in the Your TCP/IP Properties Table on
page 14.
4 Close the window.
Microsoft Windows NT
1 Click Start => Programs => Command Prompt.
2 At the MS-DOS prompt, type ipconfig /all. Press the Enter
key.
3 Record the values in the Your TCP/IP Properties Table on
page 14.
4 Close the window.
TCP/IP Property Value
IP Address
. . .
Subnet Mask
. . .
Default Gateway
. . .
DHCP Enabled Yes No
DNS Server(s) Primary
. . .
Secondary
. . .