User guide

158 WatchGuard Firebox X Edge
Status
Indicates that a management connection has been made. This
light turns off a few minutes after you close the browser
connection to the Firebox X Edge Web pages.
Mode
When lit and steady, indicates that the Firebox X Edge is
operational and has connected to the Internet. When lit and
flashing, indicates that the WAN is connected but the Firebox
cannot establish a connection to the Internet.
Attn
Reserved for future use.
Power
Indicates that the Firebox X Edge is currently powered up.
RESET button
Press the RESET button to reset the Firebox X Edge to the
factory default configuration. For more information, see “Factory
Default Settings” on page 39.
Back view
The back of the Firebox X Edge has several Ethernet ports and
inputs:
Serial port (DB9)
For modem connectivity.
Seven numbered Ethernet ports (0-6)
These Ethernet ports are for the trusted network interface.
OPT port
This Ethernet port is for the optional network interface.
Two WAN Ethernet ports (WAN, WAN2)
The WAN ports are for the external network interface.