User guide

Managing the Firebox® X Edge
148 WatchGuard Firebox X Edge
2 From the navigation bar at left, select
Administration => VPN Manager Access.
The VPN Manager Access page appears.
3 Select the Enable VPN Manager Access checkbox.
4 Type the status passphrase and then type it again to confirm in
the applicable fields.
5 Type the configuration passphrase and then type it again to
confirm in the applicable fields.
N OTE N OTE
These passphrases must match the passphrases used in the VPN
Manager software or the connection will fail.
6 Click Submit.
Updating the Firmware
Check regularly for Firebox® X Edge updates on the WatchGuard
Web site:
https://www.watchguard.com/support/sohoresources
Two different methods exist for updating the firmware. One method
uses a slightly larger download and automatically updates the firm-
ware on the Firebox X Edge when run from any computer running
Windows. The other method uses a smaller download and allows
you to update the firmware through the Firebox X Edge Web pages.
If you configure your Firebox X Edge from a computer that does not
use the Windows operating system, such as Macintosh or Linux, you