User guide

Setting up VPN Manager Access
User Guide 147
Follow these instructions to use HTTP instead of HTTPS:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox.
The default IP address is: https://192.168.111.1
2 From the navigation bar at left, select
Administration => System Security.
The System Security page appears.
3 Select the Use non-secure HTTP instead of secure HTTPS for
administrative Web site checkbox.
4 Verify that the HTTP Server Port is set to 80.
5 Click Submit.
Setting up VPN Manager Access
Use the VPN Manager Access page to allow your Firebox X Edge to
be remotely managed by WatchGuard VPN Manager.
VPN Manager does not run directly on your Firebox X Edge; it is
separate software that runs on a WatchGuard Firebox III or Firebox
X. It configures and manages VPN tunnels.
For more information about VPN Manager, see the WatchGuard
Web site:
https://www.watchguard.com/products/vpnmanager.asp
Follow these instructions to configure VPN Manager access:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox X
Edge.
The default IP address is: https://192.168.111.1