User guide

Configuring the MUVPN Client
128 WatchGuard Firebox X Edge
Configuring the Firebox for MUVPN Clients Using
Pocket PC
To create a MUVPN tunnel between the Firebox X Edge and your
Pocket PC, you must configure the MUVPN Clients feature on the
Firebox. Follow the previous procedure, except select Pocket PC
from the VPN Client Type drop-down list.
For additional information about configuring your Pocket PC to
serve as an MUVPN client, go to the WatchGuard Web site:
https://www.watchguard.com/support/sohoresources/soinstallhelp.asp
Connecting and Disconnecting the MUVPN Client
The MUVPN client software makes a secure connection from a
remote computer to your protected network through the Internet.
To establish this connection, you must connect to the Internet and
use the MUVPN client to connect to the protected network.
Connecting the MUVPN client
1 Connect to the Internet through a Dial-Up Networking
connection, a LAN connection, or a WAN connection.
From the Windows desktop system tray:
2 If the MUVPN client is not active, right-click the icon and select
Activate Security Policy.
For information about how to determine the status of the MUVPN icon,
see “The MUVPN client icon” on page 128.
From the Windows desktop:
3 Select Start => Programs => Mobile User VPN => Connect.
The WatchGuard Mobile User Connect window appears.
4 Click Yes.
The MUVPN client icon
The MUVPN icon appears in the Windows desktop system tray. The
icon image provides information about the status of the connection.
Deactivated