User guide

Enabling MUVPN Access for a User Account
User Guide 127
Enabling MUVPN Access for a User Account
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox X
Edge.
The default trusted IP address is https://192.168.111.1.
2 Add a new user or edit an existing user, as described in “Adding
or Editing a User Account” on page 143.
3 Click the MUVPN tab.
4 Select the Enable MUVPN for this account checkbox.
5 Type a shared key in the applicable field.
6 Type the virtual IP address in the applicable field.
The virual IP address must be an address from the Firebox X Edge’s
trusted network that will not be used by any other computer behind the
Firebox. This address is used by the remote computer to connect to the
Firebox X Edge.
7 From the Authentication Algorithm drop-down list, select the
type of authentication.
The options are MD5-HMAC and SHA1-HMAC.
8 From the Encryption Algorithm drop-down list, select the type
of encryption.
The options are DES-CBC and 3DES-CBC.
9 Set MUVPN key expiration in either kilobytes or hours. The
default values are 8192 KB and 24 hours, respectively.
10 Select Mobile User from the VPN Client Type drop-down list.
11 Select the All traffic uses tunnel (0.0.0.0/0 IP Subnet)
checkbox only if you want the remote client to send all its
traffic (including normal Web serving) through the VPN to the
Firebox X Edge. This allows the MUVPN client to communicate
with networks across a VPN that the Firebox X Edge has
constructed to another office. Note that if this checkbox is
selected, the MUVPN client software must be configured
accordingly with the subnet and mask fields set to 0.0.0.0. For
more information, see “Configuring the MUVPN client” on
page 118.
12 Click Submit.