User guide

Installing and Configuring the MUVPN Client
User Guide 125
7 Select Diffie-Hellman Group 1 from the Key Group drop-down
list.
8 Expand Key Exchange (Phase 2).
A Proposal entry appears.
9 Select Proposal 1.
The IPSec Protocols settings appear to the right.
10 Select Both from the SA Life drop-down list.
11 Type 86400 in the Seconds field and 8192 in the KBytes field.
12 Select None from the Compression drop-down list.
This is the default setting. The Firebox X Edge does not support
compression.
13 Select the Encapsulation Protocol (ESP) checkbox.
14 Select a value for the Encrypt Alg and Hash Alg drop-down
lists.
NOTE
The encrypted and hash values must match the settings of the
Firebox X Edge. If the settings do not match, the connection will
fail.
15 Select Tunnel from the Encapsulation drop-down list.
This is the default setting.
16 Make sure the Authentication Protocol (AH) checkbox is not
selected.
17 Select File => Save or click the button shown at the right.