User guide

Configuring the MUVPN Client
124 WatchGuard Firebox X Edge
Edge and must match exactly as described below. Phase 2 settings
must match the settings of the Firebox X Edge.
1 From the Network Security Policy field, expand Security Policy.
Both Phase 1 and Phase 2 negotiations appear.
2 Expand Authentication (Phase 1).
A Proposal entry appears.
3 Select Proposal 1.
The Authentication Method and Algorithms settings appear to the right.
4 Select Pre-Shared Key from the Authentication Method drop-
down list.
NOTE
Phase 1 values must be as specified in the following steps. Phase 2
values must match the settings of the Firebox X Edge.
5 Select DES from the Encrypt Alg drop-down list and then select
SHA-1 from the Hash Alg drop-down list.
6 Select Unspecified from the SA Life drop-down list.
This is the default setting.