User guide

Installing and Configuring the MUVPN Client
User Guide 123
10 Select Any from the Name drop-down list.
This is the default setting.
11 Click Pre-Shared Key.
The Pre-Shared Key dialog box appears.
12 Click Enter Key.
The text field is enabled.
13 Type the exact text of the MUVPN client passphrase entered on
the Firebox X Edge. Click OK.
NOTE
Both the pre-shared key and the e-mail address must exactly
match the system passphrase and system administrator name
settings of the Firebox X Edge. If they do not match, the
connection will fail. Normally, the pre-shared key and e-mail
address must match the user name and shared key specified in the
MUVPN account setup on the Firebox X Edge as described in
“Enabling MUVPN Access for a User Account” on page 127.
Defining Phase 1 and Phase 2 settings
Follow these steps to define the Phase 1 and Phase 2 settings. Phase
1 settings for MUVPN clients are not configurable on the Firebox X