User guide

Configuring the MUVPN Client
122 WatchGuard Firebox X Edge
6 Clear the Allow to Specify Internal Network Address checkbox.
Click OK.
It is not necessary to specify the MUVPN client’s internal IP address. The
Firebox X Edge assigns this address automatically. Because setting the
internal address improperly causes the VPN to fail, clearing this
checkbox prevents that possible error by making it impossible to set the
internal IP address.
7 Select None from the Select Certificate drop-down list.
8 Select E-mail Address from the ID Type drop-down list and
then enter the user name defined on the Firebox X Edge in the
applicable field.
9 Select Disabled from the Virtual Adapter drop-down list if the
Firebox X Edge will not assign private WINS and DNS Server IP
addresses to the MUVPN client. Select Preferred or Required if
the Firebox X Edge will assign the client private WINS and DNS
Server IP addresses automatically.
Preferred means that if the connection launch using the virtual adapter
fails, the VPN can still be constructed using address substitution instead.
(In this case, no WINS or DNS address will be assigned but the tunnel can
still build.) Required means that if the client computer cannot create the
virtual adapter for some reason, the connection will fail. (This is rare and
usually indicates a problem with the client’s IP networking stack, or an
incompatibility with another IPSec client software previously installed).