User guide

Configuring the MUVPN Client
120 WatchGuard Firebox X Edge
Using this option also allows the MUVPN client to access any
networks across a VPN that the Firebox X Edge has constructed
to another office.
NOTE
The addresses you type in the Subnet and Mask fields must be
identical to the virtual IP address you typed on the Add MUVPN
Client page. See “Preparing Remote Computers to Use the MUVPN
Client” on page 108.
9 Select All from the Protocol drop-down list.
This is the default setting.
10 Select the Connect using checkbox and then select Secure
Gateway Tunnel from the Connect using drop-down list.
11 If the Firebox X Edge external interface has a static public
address, select IP Address from the ID Type drop-down list and
then type the IP address of the external interface in the
applicable field.
If the Firebox X Edge external public IP address is dynamically
assigned and the Firebox X Edge has dynamic DNS configured,
select Any from the ID Type drop-down list, and then select
Gateway Hostname in the new box that appears to the right.
Enter the fully qualified domain name in the lower-right field.
Defining the My Identity settings
To define the My Identity settings, follow these steps.
1 Expand the Network Security Policy to display the new entry.
The My Identity and Security Policy entries appear.
2 Select Security Policy.
The Security Policy dialog box appears.