User guide

Preparing Remote Computers to Use the MUVPN Client
User Guide 113
From the Windows desktop:
1 Select Start => Settings => Network and Dial-up Connections.
2 Select the dial-up connection you use to access the Internet.
The connection window appears.
3 Click Properties and then click the Networking tab.
4 Make sure the following components are installed and enabled:
- Internet Protocol (TCP/IP)
- File and Printer Sharing for Microsoft Networks
- Client for Microsoft Networks
Installing the Internet Protocol (TCP/IP) network
component
From the connection window, Networking tab:
1 Click Install.
The Select Network Component Type window appears.
2 Double-click the Protocol network component.
The Select Network Protocol window appears.
3 Select the Internet Protocol (TCP/IP) network protocol. Click
OK.
Installing the File and Printer Sharing for Microsoft
Networks
From the connection window, Networking tab:
1 Click Install.
The Select Network Component Type window appears.
2 Double-click the Services network component.
The Select Network Service window appears.
3 Select the File and Printer Sharing for Microsoft Networks
network service and then click OK.
Installing the Client for Microsoft Networks
From the connection window, Networking tab:
1 Click Install.
The Select Network Component Type window appears.
2 Double-click the Client network component.
The Select Network Protocol window appears.
3 Select the Client for Microsoft Networks network client and
then click OK.