User guide

Preparing Remote Computers to Use the MUVPN Client
User Guide 111
7 Click the WINS Configuration tab and then select the Enable
WINS Resolution checkbox.
8 Type the IP address of the WINS server in the WINS Server
Search Order text field and then click Add.
If you have multiple remote WINS servers, repeat steps 7 and 8.
9 Click OK to close the TCP/IP Properties window. Click OK to
close the Network window.
The System Settings Change dialog box appears.
10 Click Yes to restart the computer.
The computer reboots.
Windows NT setup
This section describes how to install and configure the network
components that are required for the Windows NT operating system.
These components must be installed before the MUVPN client will
function correctly on a Windows NT computer.
Installing Remote Access Services on Windows NT
Remote Access Services (RAS) must be installed before the Mobile
User VPN Adapter can be installed. If RAS is not installed, follow
these steps.
Follow the Windows desktop:
1 Select Start => Settings => Control Panel.
2 Double-click the Network icon.
The Network window appears.
3 Click the Services tab and then click Add.
4 Select Remote Access Services from the list and then click OK.
5 Enter the path to the Windows NT install files or insert your
system installation CD and then click OK.
The Remote Access Setup window appears.
6 Click Yes to add a RAS device, such as a modem, and then click
Add.
7 Complete the Install New Modem wizard.
NOTE
If there is no modem installed, you can select the Don't detect
my modem; I will select it from a list
checkbox. Select the
standard 28800 modem. To install RAS, Windows NT requires at
least one RAS device, such as a modem, to be installed. If a