User guide

Configuring the MUVPN Client
110 WatchGuard Firebox X Edge
From the Windows desktop:
1 Select Start => Settings => Control Panel.
2 Double-click the Add/Remove Programs icon.
The Add/Remove Properties window appears.
3 Click the Windows Setup tab.
The Windows Setup dialog box appears. The operating system searches
for installed components.
4 Select the Communications checkbox and then click OK.
The Copying Files dialog box appears. The operating system copies the
necessary files.
5 The Dial-Up Networking Setup window appears. Click OK to
restart the computer.
The computer reboots.
The Dial-up Networking component of Windows 98 must be
updated with the 1.4 patch. This update is available from the
Microsoft Web site.
Configuring the WINS and DNS settings
The remote computer must be able to communicate with the WINS
servers and the DNS servers. These servers are located on the trusted
network that is protected by the Firebox X Edge.
From the Windows desktop:
1 Select Start => Settings => Control Panel.
2 Double-click the Network icon.
The Network window appears.
3 Select the network component TCP/IP => Dial-Up Adapter and
then click Properties.
The TCP/IP Properties Information window appears.
4 Click OK.
5 Click the DNS Configuration tab and then select the Enable
DNS checkbox.
6 Type the IP address of the DNS server in the DNS Server Search
Order text field. Click Add.
If you have multiple remote DNS servers, repeat steps 5 and 6.
NOTE
The DNS server on the private network behind the Firebox X Edge
must be the first server in the list.