User guide

Preparing Remote Computers to Use the MUVPN Client
User Guide 109
2 Double-click the Network icon.
The Network window appears.
3 Make sure the Client for Microsoft Networks is installed.
The Client for Microsoft Networks must be installed before you continue
with this procedure. For instructions, see “Installing the Client for
Microsoft Networks” on page 109.
4 Click the Identification tab.
5 Type a name for the remote computer in the applicable field.
This name must be unique on the remote network.
6 Type the domain name for this connection in the applicable
field.
7 Enter a description for the remote computer in the applicable
field.
This step is optional.
8 Click OK to close the Network window.
Click Cancel if you do not want to save the changes.
9 Reboot the computer.
Installing the Client for Microsoft Networks
The Client for Microsoft Networks must be installed before you can
configure network names. If the Client for Microsoft Networks is not
installed, follow these steps.
From the Network window:
1 Click the Configuration tab and then click Add.
The Select Network Component Type window appears.
2 Select Client and then click Add.
The Select Network Client window appears.
3 Select Microsoft from the list at left. Select Client for
Microsoft Networks from the list at right and then click OK.
4 Select Client for Microsoft Networks and then click Properties.
5 Select the Log on to Windows NT domain checkbox.
6 Type the domain name in the Windows NT Domain text field.
Examples of typical domain names are “sales”, “office”, and “warehouse”.
7 Select the Logon and Restore Network Connections checkbox.
Installing Dial-Up Networking
Dial-Up Networking must be installed before the Mobile User VPN
Adapter can be installed. If Dial-up Networking is not installed, fol-
low these steps.