User guide

Configuring WebBlocker
90 WatchGuard Firebox X Edge
N OTE N OTE
This WebBlocker feature is applicable only for outbound requests
to access Web sites. You cannot use WebBlocker exceptions to
make an internal host exempt from WebBlocker rules.
1 From the navigation bar on the left, select WebBlocker =>
Allowed Sites.
The WebBlocker Allowed Sites page appears.
2 From the drop-down list at the lower-left portion of the page,
select whether the address or addresses you specify are a host IP
address, network IP address, or host range.
3 In the box to the right of the drop-down list, type the host or
network IP address of the allowed site. If you specified a range,
type the start and end point of the range. Click Add.
4 Repeat for other allowed sites. When you are done adding sites,
click Submit.
To remove an item from the list, select the address. Click Remove.
Blocking Additional Web Sites
You might want to keep your users from viewing certain sites even if
WebBlocker allows them. For example, you may receive a LiveSecu-
rity® Service alert telling you that a certain commonly used Web site