User guide

Logging to a WatchGuard Security Event Processor Log Host
User Guide 79
to do this, see the WatchGuard System Manager User Guide . Then follow
these instructions to send your event logs to the WSEP.
1 Type the IP address of the trusted network in your browser window to
connect to the System Status page of the Firebox.
The default IP address is: https://192.168.111.1
2 From the navigation bar at left, select Logging => WSEP Logging.
The WatchGuard Security Event Processor Logging page appears.
3 The Enable WatchGuard Security Event Processor Logging checkbox
should contain a checkmark. If it does not, select it such that the
checkmark appears.
4 In the Log Host IP Address field, type the IP address of the WSEP server
that is your log host.
5 Type a passphrase in the Log Encryption Key field and confirm the
passphrase in the Confirm Key field.
6 In the Device Name field, type a friendly name for the Firebox X Edge.
This identifier enables the WSEP log host to distinguish between different devices
logging to it. If this field is left blank, the Firebox X Edge will identify itself to the
WSEP log host by the IP address currectly assigned to the Firebox’s external
interface.
7 Click Submit.
N OTE N OTE
Use the same log encryption key recorded in the WSEP application.