User guide

Configuring Logging
78 WatchGuard Firebox X Edge
because of a packet handling violation, duplicate messages, return
error messages, and IPSec messages.
Each log message has three parts:
Time
The exact time of the event that triggered the log message.
Category
The category of the message. For example, whether the message
originated from an outside source such as an IP address, from
the configuration file, and so on.
Message
The text of the message
The following procedure shows how to view the event log:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the Firebox X
Edge.
The default IP address is: https://192.168.111.1
2 From the navigation bar at left, select Logging.
The Logging page appears with the Event Log at the bottom of the page.
Logging to a WatchGuard Security Event
Processor Log Host
The WatchGuard Security Event Processor (WSEP) is an application
that is available with the WatchGuard System Manager software. If
you have a Firebox® III or Firebox X, configure the WSEP to accept
the log messages from your Firebox X Edge. For instructions on how