User guide

Control Center Components
User Guide 69
Firebox and VPN tunnel status
The section in Control Center directly below the front panel shows the
current status of the Firebox and of branch office and remote user VPN
tunnels.
Firebox Status
The following information is displayed under Firebox Status, as shown in
the following figure:
• Status of the High Availability option. When properly configured and
operational, the IP address of the standby box appears. If High
Availability is installed but the secondary Firebox is not responding,
the display indicates “Not Responding.”
• The IP address of each Firebox interface, and the configuration mode
of the External interface.
• Status of the CA (root) certificate and the IPSec (client) certificate.
If you expand the entries under Firebox Status, as shown in the following
figure, you can view:
• IP address of the default gateway and netmask