User guide

Chapter 6: Using the WatchGuard Control Center
68 WatchGuard Firebox System
Pause the display (appears only when connected to Firebox)
Connect to Firebox (appears only when not connected to Firebox)
Launch Policy Manager
Launch Firebox Monitors
Launch LogViewer
Launch HostWatch
Create Historical Reports
Show and hide the Firebox and Tunnel Status windows
Front panel
Under the toolbar is a representation of the front panel of the Firebox,
shown on the following figure, including the Security Triangle Display,
Traffic Volume Indicator, Processor Load Indicator, and basic status
information.
The lights on the display represent those found on the front panel of the
Firebox. The triangle shows the predominant flows of traffic among the
Trusted, External, and Optional interfaces. A red corner of the triangle
illuminates when that interface is blocking packets. The two bar graphs
indicate traffic volume and the proportion of Firebox capacity being used.
For more information on the front panel, see the following FAQ:
https://support.watchguard.com/advancedfaqs/fbhw_lights.asp