User guide

Chapter 5: Using Policy Manager to Configure Your Network
56 WatchGuard Firebox System
Configuring Drop-in Mode
If you selected drop-in mode, you can set several optional properties:
1 From the Network Configuration dialog box, click Properties.
The Advanced dialog box appears, showing the Drop-In tab, as shown in the
following figure.
2 Configure the properties in the dialog box.
For a description of each control, right-click it and then select What’s This?.
Defining External IP Aliases
You use the Aliases button on the Network Configuration dialog box
when you are using static NAT. For more information, see “Adding
external IP addresses” on page 87.