User guide

Chapter 16: Controlling Web Site Access
226 WatchGuard Firebox System
process called WebDBdownload.bat, which appears in your WatchGuard
directory under the WBServer folder:
1 Open Control Panel and select Scheduled Tasks. (If it is not listed, see
“Installing Scheduled Tasks,” in the following section.)
2 Select Add Scheduled Task.
3 The Scheduled Tasks wizard launches. Click Next.
4 On the next screen, which shows a list of programs to select from,
select Browse.
5 Navigate to your WatchGuard directory and then into WBServer.
Select WebDBdownload.bat.
6 Specify how often you want to perform this task. WatchGuard
suggests you update your database every day, although you can do it
less often if you have bandwidth concerns. Click Next.
7 Enter a start time for the process. Because these downloads are close
to 60 megabytes, choose a time outside normal work hours.
8 Select the frequency you want for this task. WatchGuard recommends
you perform updates on weekdays, because the database is not
updated on weekends.
9 Select a suitable start date. Click Next.
10 Enter the user name and passwords that this process requires to run.
Make sure this user has access to the proper files. Click Next.
11 Review your entries. Click Finish.
Installing Scheduled Tasks
If you are running Windows NT 4.0, you might need to manually install
Scheduled Tasks:
1 Open Control Panel and select Add/Remove Programs.
2 From the list, select Microsoft Internet Explorer.
3 When prompted, select Add a component.
4 A list of software appears (this may take a few minutes). If you’re
using Internet Explorer 4.0, under Additional Explorer
Enhancements, select Task Scheduler. If you’re using Internet
Explorer 5.0 or later, select Offline Browsing Pack.