User guide

Managing the WebBlocker Server
User Guide 225
6 To remove an item from either the Allow or the Deny list, select the
address. Click the corresponding Remove button.
Managing the WebBlocker Server
The WebBlocker server is installed as a Windows Service and can be
started or stopped from the Services application located in the Windows
Control Panel Program Group.
Installing Multiple WebBlocker Servers
You can install two or more WebBlocker servers in a failover
configuration. If the primary WebBlocker server fails, the Firebox
automatically fails over to the first server in the WebBlocker Servers box,
as shown in “Activating WebBlocker” on page 220.
To add additional WebBlocker servers:
1 On the WebBlocker Controls tab in the HTTP Proxy dialog box, click
Add.
2 In the dialog box that appears, type the IP address of the server in the
Value field. Click OK.
You can use the Up and Down buttons to change the position of the
servers in the list.
When operating two or more WebBlocker servers in a failover mode, the
time between failovers may take up to two minutes.
Automating WebBlocker Database Downloads
The most effective way to routinely download and update your
WebBlocker database is to use Windows Task Scheduler. To do this, add a