User guide

Blocking Sites
User Guide 151
From Policy Manager:
1 On the toolbar, click the Blocked Sites icon (shown at
right).
You can also select Setup => Blocked Sites. The Blocked Sites
dialog box appears, as shown in the following figure.
2 Click Add.
3 Use the Choose Type drop list to select a member type. The options
are Host IP Address, Network IP Address, or Host Range.
4 Enter the member value.
Depending on the member type, this can be an IP address or a range of IP
addresses. When typing IP addresses, type the digits and periods in sequence. Do
not use the TAB or arrow key to jump past the periods. For more information on
entering IP addresses, see “Entering IP addresses” on page 38.
5 Click OK.
The Blocked Sites dialog box appears displaying the new site in the Blocked Sites
list.
Using an external list of blocked sites
You can create a list of blocked sites in an external file. This file must be a
.txt file. To load an external file into your blocked sites list:
1 In the Blocked Sites dialog box, click Import.
2 Browse to locate the file. Double-click it, or select it and click Open.
The contents of the file are loaded into the Blocked Sites list.