User guide

Chapter 10: Creating Aliases and Implementing Authentication
140 WatchGuard Firebox System
3 Enter the IP address of the SecurID server.
4 Enter or verify the port number used for SecurID authentication.
The default is 1645.
5 Enter the value of the secret shared between the Firebox and the
SecurID server.
The shared secret is case-sensitive and must be identical on the Firebox and the
SecurID server.
6 If you are using a backup server, enable the Specify backup SecurID
server checkbox. Enter the IP address and port number for the backup
server.
7 Click OK.
To set up the RADIUS server, see “To configure the RADIUS server” on
page 137.