User guide

Configuring SecurID Authentication
User Guide 139
On the CRYPTOCard server:
1 Add the IP address of the Firebox where appropriate according to
CRYPTOCard’s instructions.
2 Take the user or group aliases from the service properties listboxes
and add them to the group information in the CRYPTOCard
configuration file. Only one group can be associated with each user.
For more information, consult the CRYPTOCard server documentation.
Configuring SecurID Authentication
For SecurID authentication to work, the RADIUS and ACE/Server servers
must first be correctly configured. In addition, users must have a valid
SecurID token and PIN number. Please see the relevant documentation
for these products.
N OTE
WatchGuard does not support the third-party program Steel Belted
RADIUS for use with SecurID. You should use the RADIUS program
bundled with the RSA SecurID software.
From Policy Manager:
1 Select Setup => Authentication Servers.
The Authentication Servers dialog box appears.
2 Click the SecurID Server tab.
You might need to use the arrow buttons in the upper-right corner of the dialog box
to bring this tab into view.